Titebond Instand Bond Activator

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Instant Bond Activator is used to accelerate the curing of all Titebond Instant Bond Adhesives. The Activator is especially effective for large gaps, very porous woods and bridge bonding joints, bonding acidic surfaces or in low humidity conditions. It is a heptane-based solvent that will not mar finishes or damage plastics.

Features & Benefits

• Designed for use with all Titebond Instant Bond Adhesives
• Accelerates the curing of Titebond Instant Bond Adhesives
• Especially effective for large gaps, very porous woods and bridge bonding joints
• Useful when bonding acidic surfaces or in low humidity conditions
• Heptane-based solvent will not mar finishes or damage plastics

Application Guidelines

Application Temperature: Above 50°F (10°C)
Assembly Time After Application: Immediate (70°F : 50% RH)
Method of Application: Spray bottle or brush
Limitations: Titebond Instant Bond Activator is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times of Titebond Instant Bond Adhesives may be affected by environmental conditions. Product is extremely flammable. Keep away from heat, sparks and flame.

KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

• Type Heptane-based accelerator
  
• Reactive VOC 720 g/L
• State Liquid
• Weight Per Gallon 6.95 lbs.
• Color Clear
• Flashpoint 15°F
• Viscosity 3 cps
• Freeze / Thaw Stability Stable
• Percent Volatile 100%
• Specific Gravity 0.79
• Storage Life 2 yrs in unopened containers stored under 50°F

Caution Statement

DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. Not for use on products in contact with food items. Please use Titebond III Premium Wood Glue or Titebond II Ultimate Wood Glue for items used for indirect food contact. KEEP OUT OF THE REACH OF CHILDREN.